-
Description
-
Specification
PBM is a device for the following:
- Micron and sub-micron grinding.
- Alloying.
- Mixing of solid -solid and solid- liquid to produce a truly homogenous product in a very short time.
The above machine can be used for analytical purposes, control of process parameter and scaling up. It is mostly used for expensive materials, which is available in small quantity and with no- loss in grinding process and less contamination. PBM is by far the best device to develop new parameters. In the case of grinding hard pure material this is the only option.
We can supply a PBM with the following;
- Four bowls, two bowls and a Single bowl.
- Capacity of the bowls – 500 ml, 250 ml, 150 ml and 100 ml.
- Advantages:
- Micron sub-micron generation.
- Four samples can be made at a time.
- Very small quantity of sample can be used.
- No contamination by the bowl and the grinding media.
- Cycle of grinding time is very less.
- It can be used for grinding material up to -250 mesh within a very short time.
- Zero loss on handling.
- No vibration and no noise pollution while the machine runs.
- Can be used with inert atmosphere.
- Special cooling arrangement can be provided for the bowls.
- Simple to operate and no special skill are required.
- Working of the machine is automatic.
- Occupies less space.
- Features of Control Panel:
- Variable frequency control
- Speed ratio (revolution: rotation) 1:2
- Timer: 1 – 999 minutes.
- Alternating operation time: 1 – 99 minutes.
- Maximum continuous working hours (full load): 72 hrs
- Manual or automatic timed forward or reverse rotation.
- Control panel: Variable frequency, step less speed regulation, programmable controls, LED display, automatic timing positive inversion and time off.