The present set-up is designed to study the frictional losses in pipe line when fluid travels through these. The setup consists of two pipes of different diameters, which are connected in parallel. Control valves are fitted on each pipe line, which enables to operate selected one pipe at a time for experiment. Pressure tapings are provided on each pipe to measure the pressure losses. A differential pressure transmitter is provided to measure the pressure difference. Present set-up is self-contained water re-circulating unit, provided with a sump tank, centrifugal pump etc. Water is pumped by means of centrifugal pump and passing through the pipe sections, it returns back to the sump which make the system re-circulating type. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of flow sensor fitted in water line. The supplied set-up is complete in all respect. Only water supply and electricity supply is to be provided by the end user for running the set-up. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of LabView This software is compatible to interfacing unit designed by Engineers. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.